Thanks for visiting Ancient Symbols. Please remember to bookmark this page Ancient Bronze. If you found what your looking for, then don"t forget to click an appreciation button above for this post.
![]() Ancient Chalcidian Bronze Helmet 4th-3th cent. B.C. US $17,550.00
|
![]() ANCIENT BRONZE AX IN WARRIOR FIGURE GREEK 600-300 BC US $499.00
|
Ancient Bronze
The History Behind Bronze Sculptures
Bronze sculpture is the most common form of cast metal sculptures because of a characteristic trait that is as unusual as it is desirable. Commonly used bronze alloys will expand a little just before being set so that even the finest details of a mold are filled.
Bronze sculptures are also strong while ductile, or lacking in brittleness, allowing figures to be depicted in actions such as leaps and flights. Supports for bronze statues need smaller cross-sections because of such qualities, as can be seen in equestrian statues where only two hooves are on the base.
Today's examples are usually created of ninety percent copper and ten percent tin, while in antiquity bronze works were sometimes made with other elements such as phosphorus, manganese, aluminium, or silicon. Interestingly, far more stone and ceramic works have come down to us through the ages than those made of bronze, as the metal was very precious and often melted down to produce new sculptures or weapons and armor in times of war.
Thus, really few big examples in bronze are available from ancient times, and of these most are not in great condition. Indeed, most works exhibited in museums, while still full of the evidence of wear and tear, have been painstakingly restored to a quality suitable for display.
Working sucessfully with bronze generally requires a high level of skill, and a number of distinct casting processes may need to be employed, such as lost-wax casting and also the related modern-day technique of investment casting. Other methods include sand casting and centrifugal casting.
After final polishing, corrosive materials may be applied to bronze works in order to form a patina or film produced by oxidation or some other chemical procedure and establish some control over the color and finish. As an example, reactive chemicals may be applied to produce a novel marble-like appearance.

If you are looking for a different item here are a list of related products on Ancient Symbols, please check out the following:

































































































